Automobile Titanium Parts
HOSN Titanium Parts is made from Aerospace Grade Titanium Alloys(Grade 5, Ti6Al4V) and using special head forging technology to ensure much higher quality than totally lath turned from titanium bars.Also titanium has low density(451.g/cm³),high specific strength and excellent corrosion resistance features.
So they are widely used as automobile parts.The representative products include titanium lug nuts,Titanium wheel bolts,Titanium Fasteners,Titanium Shaft Knobs and other titanium engine parts for Audi, BMW, Ferrari, Porsche, Tesla,etc.
Also they can be anodized and PVD coated to many colors which include Gold,Blue,Black,Purple,Green,Rainbow,Burnt blue,Burnt Green and Red colors.
Gold PVD colored Titanium Lug Nuts M12x1.25mm
This Gold PVD Coated (Nitrided coating) titanium lug nuts,it has cone seat and M12x1.25mm thread size. It will fit for Nissan,Suzuki,Subaru,etc. All are made from titanium alloy Grade 5 (Ti6Al4V) which can ensure low weight and high specific strength. Gold nitriding finish can promote the finish hardness and Wear resistance.
Burnt Magnetic Titanium Oil Drain Plug Screws
This is Magnetic Titanium Oil Drain Plug Screws,it is designed for cars. Titanium ones won’t get rusty and has lower weight.It is the best choice as oil drain plugs. Sizes including M12x1.25mm, M12x1.5mm, M12x1.75mm, M14x1.5mm, M16x1.6mm, M20x1.5mm and M24x1.5mm.
M8x45mm Titanium Stud Kits with 12 point nuts
This is M8x45mm titanium stud kits,it include on titanium stud,one 12 point nuts and one titanium flat washers.All are made from titanium alloy Grade 5 which has low weight,high strength and excellent corrosion resistance features.
M14x1.5 Titanium Wheel Bolts with 60 degree Cone Seat
This Titanium Wheel Bolt has M14x1.5mm with 28mm thread length; 60 degree Cone seat; 17mm hex Size and 67mm total length.It is made from titanium Grade 5 Ti6Al4V which can save weight and ensuring high strength.
Titanium 12 Point Bead Lock Kit 5/16″-18 x 1-1/4″
This is Titanium 12 piont bead lock kits with 5/16″-18 x 1/4″ thread sizes,it has 14mm flange diameter and forged high strength 12 point flange head.It is made from titanium alloy Grade 5 which has low weight and high strength.
Titanium Pivot Balls
This titanium pivot ball is customized by customers,it is made from titanium Alloy Grade 5,it has low weight,high strength and excellent corrosion resistance features.It has 14.2mm ball diameter,5mm though hole and total 17mm long.
12 Point Flange Titanium Nuts
The 12 Point Flange Titanium Nuts are made from titanium alloy Grade 5 with M6 and M8 thread sizes..They are used to seal the exhaust manifold to the cylinder head.They has low weight,high strength and excellent corrosion resistance features.
Titanium Exhaust Manifold Stud kits
The titanium Exhaust Manifold Studs kits are made from titanium alloy Grade 5 with M6 and M8 thread sizes.It is 3 in 1 set which include 1 thread stud, 1 piece 12 point nuts and 1 flat washer.They are used to seal the exhaust manifold to the cylinder head.They has low weight,high strength and excellent corrosion resistance features.
Titanium Exhaust Manifold Studs
The titanium Exhaust Manifold Studs are made from titanium alloy Grade 5 with M6 and M8 thread sizes.The titanium studs will work with the 12 point titanium flange nuts and washers to seal the exhaust manifold to the cylinder head.They has low weight,high strength and excellent corrosion resistance features.
12 point Flange Titanium Bolts with 5/16-18
This 12 point Flange titanium bolt is made from high quality titanium alloy Grade 5.It is designed for automobiles.
M8x60mm Titanium Studs
This titanium stud is made from high strength titanium alloy Grade 5,it has M8x15mm thread sizes and 60mm total length.It has high strength and low weight.
Titanium Lug Nuts
HOSN Titanium specialized with titanium lug nuts productions,they will be made from Aerospace Grade 5 Titanium Alloy Materials.
Titanium Lug Nuts M12x1.5mm
This Titanium lug nut has M12x1.5mm thread size,it has cone seat and open end.Made from high strength titanium alloy Grade 5.
Titanium Lug Bolts with M14x1.5x45mm
This titanium lug bolt has sizes M14x1.5x45mm.It has torx socket head type and the head is produced by special forging process,it can ensure the head with high torque.
Titanium Wheel Bolts with Burnt Color
This titanium wheel bolt is made from high strength titanium alloy Grade 5,it has low weight and high specific strength.It has beautiful burnt color.
Porsche Titanium wheel bolts M14X1.5mm
This titanium wheel bolt is designed for porsche,it has 17mm hex size,Ball seat SR14mm and 30mm thread length.Its weight is around 60% of steel,but has much higher strength.
Security Anti theft Titanium Lug Bolts M14X1.25 or 1.5
This titanium lug bolt has Anti theft Pentagon head type,it should be wrenched by customized socket wrench.
Titanium Lug bolts for Ferrari
This titanium lug bolt is designed for Ferrari,it has 22mm hex size; M14x1.5mm thread size; 76mm totol length and 60 degree cone seat.
Titanium lug nuts with anodized colors
Our titanium lug nuts can be anodized to many colors,it include Gold,Blue,Black,Purple,Green,Rainbow colors.Also we have other coloring process to do Oilslick,Burnt and Red colors.
Ti6Al4V Titanium Pivot Ball
This Titanium Pivot Ball is made from high strength Ti6Al4V titanium alloy,it has M5 Metric thread size and 23mm and 27mm total length.It is designed for automobiles.